Yale - USB Enrollment Equipment and Features
This page and all others on the help site will be retired in Q4 2024. Please refer to the new help site by clicking the Help icon in the top-right corner of the STRATIS Management application.
- 1 Overview
- 1.1 Required Equipment
- 1.1.1 Supported USB Enrollment Readers
- 1.1.1.1 Encrypted USB Enrollment Reader
- 1.1.1.2 Unencrypted USB Enrollment Reader
- 1.1.2 Supported Credentials
- 1.1.2.1 3rd Party Credentials
- 1.1.3 Supported Access Point Readers
- 1.1.3.1 Chirp Access Points
- 1.1.3.2 Brivo Access Points
- 1.1.1 Supported USB Enrollment Readers
- 1.1 Required Equipment
Overview
Yale locks do not support the use of smart keys and fobs.
The USB enrollment feature was introduced to allow for properties with Yale locks (or IoT properties with no locks) to enroll smart keys and fobs for use with the common area access control system integrations.
USB enrollment allows property staff to assign keys to residents and staff without having to enter the Chirp Admin Panel or the Brivo Access platforms.
Required Equipment
There are 3 physical components required to ensure the USB enrollment feature works as designed.
Supported USB Enrollment Reader
Supported Smart Keys / Fobs / Cards
Supported Access Points
Supported USB Enrollment Readers
The required USB enrollment reader is available in two different versions that look cosmetically identical. The difference between the two is the presence of SAM (Secure Access Module) loaded with the Chirp encryption keys. Both versions are compatible with Windows or Mac PCs and do not require any driver or software installation.
Properties that do not have Chirp as the access control solution must use the unencrypted USB enrollment reader, whereas properties with Chirp as the access control solution must use the encrypted USB enrollment reader.
Encrypted USB Enrollment Reader
Currently, this reader requires assembly by the installer.
Material Information
Model: WAVE ID SP Plus
Part #: WL-RDR-80MH1AKU-LF-RRC1-LK50004
Talk to your STRATIS Channel representative or RealPage Certified Partner for more information.
Unencrypted USB Enrollment Reader
Material Information
Model: WAVE ID SP Plus
Part #: WL-RDR-80MH1AKU-LF-RRC2
On Yale-Chirp properties using Chirp fobs, you can only use a reader with the “RRC1” suffix due to technical limitations.
Talk to your STRATIS Channel representative or RealPage Certified Partner for more information.
Supported Credentials
Talk to your STRATIS Channel representative or RealPage Certified Partner for more information.
Chirp Fob (Model: 60H8LK50004)
3rd Party Credentials
If Chirp cards or fobs will not be supplied talk to your STRATIS Channel representative or RealPage Certified Partner for more information.
Dual Tech Credentials or Proximity Credentials should never be used
Supported Access Point Readers
Chirp Access Points
Ethos Readers
ET10-6WS
ET20-6WS
ET25-6WS
ET10-7WS
ET20-7WS
ET25-7WS
Edge Readers
ER10-6WS
ER20-6WS
ER25-6WS
ER10-7WS
ER20-7WS
ER25-7WS
Brivo Access Points
Any 13.56MHz capable Brivo reader
All content of these pages is copyright 2024 STRATIS IoT and RealPage. Unauthorized duplication or access is strictly prohibited.