Control a Device in a Single Vacant Unit - Schlage

Owned by Lisa DellaPorta (Unlicensed)
Last updated: Aug 28, 2024 by Allen Gall
1 min read

This page and all others on the help site will be retired in Q4 2024. Please refer to the new help site by clicking the Help icon in the top-right corner of the STRATIS Management application. image-20240828-181023.png

  1. Select Devices, then the building and floor of the vacant unit to be managed.

  2. Select the arrow next to the relevant vacant unit to show its devices.

  3. Select the device to be controlled.

  4. Set the state as desired. For example, set a thermostat to Cool to 75ºF, or turn a light switch on/off.

  5. Save.

All content of these pages is copyright 2024 STRATIS IoT and RealPage. Unauthorized duplication or access is strictly prohibited.