Audit a Schlage CO200 Lock - SPED Version

Hardware Needed:

• STRATIS Tablet

• CO/CT cable

• Mini USB

1. Ensure that the tablet is connected to internet.

2. Select Door Operations via the shortcut on the STRATIS homepage.

3. Select Download Door Files.

4. Select the units to be downloaded.

   1. The blue triangle on the left of the unit group lets you view units within the group.

   2. The blue plus sign lets you select an entire unit group or an individual unit.

5. Select Download.

6. Attach the CO/CT cable to the mini usb adapter and plug it into the tablet.

   1. Select Yes if the tablet asks you to use the USB device.

7. Under Connect to Locks, select CO/CT.

8. Plug the CO/CT cable into the bottom of the CO200.

9. Press the Schlage button located at the top of the CO200 twice to put the lock into programming mode.

10. Once connected to the lock, on the left-hand side of the tablet you’ll see Download Door Audit.  Select that and the door audit will be pulled and uploaded to the servers if connected to internet

    1. If you aren’t connected to the internet, as soon as the tablet reconnects the audit will be uploaded to the servers and will be viewable on the reports page.