Commission a Schlage CT5000 Lock - SPED Version

Hardware Needed:

• STRATIS Tablet

• CO/CT cable

• Mini USB cable

1. Ensure that the tablet is connected to internet.

2. Select Door Operations via the shortcut on the STRATIS homepage.

3. Select Download Door Files.

4. Select the units to be downloaded.

   1. The blue triangle on the left of the unit group lets you view units within the group.

   2. The blue plus sign lets you select an entire unit group or an individual unit.

5. Select Download.

6. Attach the CO/CT cable to the mini usb adapter and plug it into the tablet.

   1. Select Yes if the tablet asks you to use the USB device.

7. Remove the CT5000 lid.

8. Attach the CO/CT cable to the mini usb adapter and then plug it into the tablet.

   1. Select Yes if the tablet asks you to use the USB device.

9. Under Connect to Locks, select CO/CT.

10. Plug the CO/CT cable into the top right of the CT5000.

11. The tablet should then indicate that the lock is ready to be commissioned.

12. On the CT5000, hold down the Schlage button while tapping the Link button 3 times. Let go of both buttons and select Commission on the tablet.

13. The tablet will prompt you to select a door file. Then, set the door time and program the lock.