Property Thermostat Controls - SALTO
- Lisa DellaPorta (Unlicensed)
- Allen Gall
This page and all others on the help site will be retired in Q4 2024. Please refer to the new help site by clicking the Help icon in the top-right corner of the STRATIS Management application. 
Set Thermostat Setpoint Limits on Heating and Cooling in Occupied Units
Thermostat Setpoint Limits allows you to set minimum and maximum ranges for heating, cooling, or both.
Select Devices, then Property Controls.
Select General.
To enable setpoint limits, activate the Off / On toggle for Thermostat Heat, Thermostat Cool, or both.
The first time you activate the toggle to On, default values of 55-78 (heat) and 63-85 (cool) are populated in the columns for Min and Max Values.
Enter your desired limits in the Min Value and Max Value columns. Keep in mind the range of allowed values:
The Min Value can be set from 0 - 120 degrees.
The Max Value can be set from 40 - 120 degrees.
Set Property-Wide Thermostat Controls for Common Areas and Vacant Units
Select Devices, then Property Controls.
Select Thermostats.
Select a thermostat mode, then Confirm in the window that pops up.
Adjust the thermostat set point by clicking either + or -.
To adjust settings in Auto, select the temperature to adjust before tapping + or -.
Select Set Temp and confirm the changes.
Related content
All content of these pages is copyright 2024 STRATIS IoT and RealPage. Unauthorized duplication or access is strictly prohibited.