Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

Version 1 Current »

Hardware Needed:

  • STRATIS Tablet

  • Phillips head screwdriver

  • CO/CT cable

  • Mini USB cable

  1. Remove the CT5000 lid.

  2. Press and hold both the SCHLAGE and LINK buttons for 3 seconds.

  3. When the POWER/TAMPER LED turns off, release the buttons.

  4. After a 15 second delay, the CT5000 POWER/TAMPER LED and the reader’s LED will blink green for one second, and the reader will beep for one second.

  5. Replace the lid.

  • No labels

All content of these pages is copyright 2024 STRATIS IoT and RealPage. Unauthorized duplication or access is strictly prohibited.