1. Provision a Yale Module

IMPORTANT: These steps require that you have been granted the “Integrator (Home Access)” role within the Chirp Admin Panel.

1. Download the Chirp Access mobile app: https://www.chirpsystems.com/app.

...

Start with a new lock or factory reset lock and install the lock as you would any other lock. Then, follow these steps:

IMPORTANT: Never remove or add a module without first removing at least one battery from the lock. Failure to remove batteries during module insertion/removal can destroy the module.

1. Remove at least one (1) battery from the lock, then carefully insert the module until you hear a click.

...

• If you need help create a unique master code, use the random code generator found in the Chirp Access mobile app under Staff Dashboard. Master codes should not be written down or shared. Do not use the same master code for all locks on your property.

...

3. Test Bluetooth Operation of the Lock

IMPORTANT: This step is absolutely CRITICAL for proper lock functionality.

In the Chirp Access Mobile App:

...

3. Select a Duration, Purpose: Smart Lock Provisioning, and tap Create Unit Key.

• You MUST select the Smart Lock Provisioning purpose. All other purposes will not grant the right permission to complete the test.

4. Test the lock by locking and unlocking the door lock a few several times with the Chirp app to ensure the correct state of the lock is displayedverify proper installation and functionality.

De-provision/Factory Reset a Module

...