Property Thermostat Controls - SALTO

Set Limits on Heating and Cooling in Occupied Units

1. Select Devices, then Property Controls.

2. Select General.

3. Select the fields next to Thermostat Heat Max and Thermostat Cool Min, enter the desired temperature for your Setting Value.

4. Toggling the Heat Max and Cool Min on or off will enable or disable these settings.

The Heat Max can’t be lower than 80˚F. The Cool Min can’t be higher than 65˚F. 

Set Property-Wide Thermostat Controls for Common Areas and Vacant Units

1. Select Devices, then Property Controls.

2. Select Thermostats.

   

3. Select a thermostat mode, then Confirm in the window that pops up.

4. Adjust the thermostat set point by clicking either + or -.

   • To adjust settings in Auto, select the temperature to adjust before tapping + or -.

5. Select Set Temp and confirm the changes.