This page and all others on the help site will be retired in Q4 2024. Please refer to the new help site by clicking the Help icon in the top-right corner of the STRATIS Management application. 
This article describes how to program a door lock on a dormakaba property in the Community application using an HH6. The HH6 is a handheld device allowing programming of locks in dormakaba integrations and connects to a dormakaba computer via USB.
...
Door File Expiration: Default is one (1) day. This value can be changed in Settings.
Click Settings, then select Security, then expand Maintenance Unit (HH6), then specify the desired value for Programming data expiration.
Click Save when finished.
Probe vs. NFC: As stated above, most dormakaba-supported locks support the industry-standard Near Field Communication (NFC) protocol. A small number of dormakaba locks are programmed via Probe (such as the Quantum Pixel), but they are uncommon and difficult to use.
Battery Jump with ELPS and Lock Programming: Don’t do these two things simultaneously, as it will cause issues.
Door File Sharing among Locks: While dormakaba technically allows you to re-use doors files (for example, programming the same door file to multiple doors), please DO NOT EVER do this, as it very risky. The one exception is using a “vacant unit” door file to program multiple vacant units.