| Table of Contents | ||||
|---|---|---|---|---|
|
1. Provision a Yale Module:
Note: These steps require that you have been granted the “Integrator (Home Access)” role within the Chirp Admin Panel.
1. Download the Chirp Access mobile app: https://www.chirpsystems.com/app.
...
10. Tap Next Unit to add a module to the next unit, or Back to go back to the list of Units (Step 6). Pull the screen down to refresh your Property Overview data.
...
Videos:
| Widget Connector | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
...
| Widget Connector | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
2. Register the Module with the Yale Lock
Start with a new lock or factory reset lock and install the lock as you would any other lock. Then, follow these steps:
NOTE: Never remove or add a module without first removing at least one battery from the lock. Failure to remove batteries during module insertion/removal can destroy the module.
1. Remove at least one (1) battery from the lock, then carefully insert the module until you hear a click.
...
If you need help create a unique master code, use the random code generator found in the Chirp Access mobile app under Staff Dashboard. Master codes should not be written down or shared. Do not use the same master code for all locks on your property.
...
Enter the master code followed by the gear icon.
Configure the Wireless Module Setting Mode: Tap 7, tap the gear icon, tap 3, and tap the gear icon one final time.
3. Test Bluetooth Operation of the Lock
NOTE: This step is absolutely CRITICAL for proper lock functionality.
In the Chirp Access Mobile App:
...
3. Select a Duration, Purpose: Smart Lock Provisioning, and tap Create Unit Key.
You MUST select the Smart Lock Provisioning purpose. All other purposes will not grant the right permission to complete the test.
4. Test by locking and unlocking the door lock a few times with the Chirp app to ensure the correct state of the lock is displayed.
De-provision/Factory Reset a Module:
If a lock’s module needs a replacement, the existing module must be de-provisioned.
...
5. Verify your actions and tap Continue to remove the module.
...
Videos:
| Widget Connector | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
How to Factory Reset the Yale Lock (If Needed):
This step is only necessary if you forget the mastercode or need to re-provision the entire lock:
...